Customer Support

1300 662 720

PROCAP I 3-A & II 3-A

NOTE: Power Pack only. Probe and Accessories sold Separately.
Call us on 1300 662 720 to get a quote on complete assembly.

The PROCAP I 3-A and II 3-A meet rigorous USDA, FDA and 3-A material and design standards for sanitary food and dairy processing. They can be used for high and low-level detection in bins, silos, tanks, hoppers, chutes, and other vessels used for the storage or manufacture of food or dairy products. They operate by detecting the presence or absence of material in contact with the probe, sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air. They feature a Class II hazardous location rating and are available with a wide assortment of probes and extensions to meet a variety of processing needs.

Item Code Description
BC-PC13A. PROCAP I-3A power pac with universal power supply 24 to 240 VAC/VDC with LED status light, triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, 3-A and USDA recognized, hazardous location approved, C/ US listed for Class II, Groups E, F, G
BC-PC23A. PROCAP II-3A power pac with selectable 115/230 VAC with LED status light, triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, 3-A and USDA recognized, hazardous location approved, C/US listed for Class II, Groups E, F, & G

PROCAP I 3-A Power Requirements: Universal power supply 24 to 240 VAC/VDC

PROCAP II 3-A Power Requirements: Selectable 115/230 VAC

Output Relay: DPDT 10 Amp at 250 VAC

Ambient Temp: -40ยฐF to +185ยฐF (-40ยฐC to +85ยฐC)

Process Temp: To 250ยฐF Delrin probe (121ยฐC); to 500ยฐF Teflon probe (260ยฐC)

Pressure: 500 PSI

Approvals & Certifications: Listed for Class II, Groups E, F & G Hazardous Locations

Enclosure Type: NEMA 4X, 5, 9 & 12 Housing

Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1โ€ or 2.5โ€ sanitary flange

  • Point level detection and process control for solid, liquid and slurry materials
  • Used in bins, vessels, tanks, chutes and conveyors where 3-A and/or USDA approvals are necessary
  • Dairy products, food, pharmaceuticals, and many other materials requiring 3-A or USDA approvals
  • 3-A approved, food grade design
  • โ€œQuick-Setโ€ simple calibration
  • Triple thread screw-off cover
  • Dual conduit entrance
  • Unsurpassed sensitivity 0.5 pF
  • PRO-Shield compensates for material buildup
  • Operates below RF range, temperature stable calibration and protection from RF interference
  • Fail-safe, switch selectable high/low
  • Adjustable time delay to 30 seconds
  • Visual LED indicates sensor status: uncovered, covered or power failure

Reviews

There are no reviews yet.

Be the first to review “PROCAP I 3-A & II 3-A”

Your email address will not be published. Required fields are marked *

Register Your Interest