Customer Support

1300 662 720

PROCAP IX & IIX

NOTE: Power Pack only. Probe and Accessories sold Separately.
Call us on 1300 662 720 to get a quote on complete assembly.

The BinMaster PROCAP IX and IIX capacitance sensors feature CSA Class I, Groups C & D and Class II, Groups E, F, & G ratings. Suitable for challenging environments where there is a risk of explosion, they detect high or low levels in vessels used for volatile material storage. They function by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air. They feature interference-free operation, simple calibration, and fail-safe functionality and perform accurately even in dusty, sticky, or clinging materials. A vast assortment of probes and extensions make these point-level capacitance probes highly customizable for a variety of solid, liquid, and slurry materials.

Item Code Description
BC-PC1X. PROCAP IX power pac with universal power supply 24 to 240 VAC/VDC with triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous location approved, C/US listed for Class I, Groups C & D and Class II, Groups E, F, G
BC-PC2X. PROCAP IIX power pac with selectable 115/230 VAC with triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous location approved, C/US listed for Class I, Groups C & D and Class II, Groups E, F, G

PROCAP IX Power Requirements: Universal power supply 24 to 240 VAC/VDC

PROCAP IIX Power Requirements: Selectable 115/230 VAC

Output Relay: DPDT 10 Amp at 250 VAC

Ambient Temp: -40ยฐF to +185ยฐF (-40ยฐC to +85ยฐC)

Process Temp: To 250ยฐF Delrin probe (121ยฐC); to 500ยฐF Teflon probe (260ยฐC)

Pressure: 500 PSI Approvals & Certifications: Listed for Class I, Groups C & D and Class II, Groups E, F & G Hazardous Locations

Enclosure Type: NEMA 4X, 5, 7, 9 & 12

Housing Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4โ€ NPT or 3/4โ€ NPT 316 SS standard; 1-1/4โ€ NPT 316 SS & sanitary flange optional

  • Point level detection and process control for solid, liquid and slurry materials
  • Used in bins, vessels, tanks, chutes and conveyors where an explosion rated sensor is necessary
  • Plastics, chemicals, coal, fly ash, concrete, food ingredients, pharmaceuticals, feed, grain, mining, foundries, wood or paper processing, many other materials
  • Explosion proof design for Class I hazardous location applications
  • โ€œQuick-Setโ€ simple calibration
  • Triple thread screw-off cover
  • Dual conduit entrance
  • Unsurpassed sensitivity 0.5 pF
  • PRO-Shield compensates for material buildup
  • Operates below RF range, temperature stable calibration and protection from RF interference
  • Fail-safe, switch selectable high/low
  • Adjustable time delay to 30 seconds
  • Optional sensing probes: Delrin or Teflon sleeved, food grade, flush mount, solid and flexible extensions

Reviews

There are no reviews yet.

Be the first to review “PROCAP IX & IIX”

Your email address will not be published. Required fields are marked *

Register Your Interest